| Customization: | Available |
|---|---|
| Type: | Rolling Wire |
| Material: | Copper / Copper Alloy |
|
Still deciding? Get samples of US$ 2/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features:
|
Wire Chemical Composition(%)
|
C
|
Mn
|
Si
|
P
|
S
|
Cr
|
Ni
|
Cu
|
|
0.06~0.15
|
1.40~1.85
|
0.80~1.15
|
≤0.025
|
≤0.035
|
-
|
-
|
≤0.50
|
|
Deposited Metal Mechanical Properties
|
Yield Strength
σ0.2(Mpa)
|
Tensile Strength
σb(Mpa)
|
Elongation
δ5%
|
AKV Impact Energy
(J)(-40ºC)
|
|
≥420
|
≥500
|
≥22
|
≥90
|
|
Diameter of Wire(mm)
|
Φ0.8
|
Φ1.0
|
Φ1.2
|
Φ1.6
|
|
Welding Current(A)
|
40~140
|
50~220
|
80~350
|
120~450
|
|
Matters needing attention:
|
||||
|
1. Wire into the plant must be stored in dry conditions, can not open welding wire coil waterproof packaging.
2. Welding shall be removed before welding surface oil, rust, water and other impurities. 3. The CO2 gas protection, CO2 gas purity 99.98%. 4. CO2 welding protective gas flow rate should be controlled at 20~25L/min. 5. Wire extension length should be controlled in the range of 15~25mm. |
Dezhou Xinjiayuan Hardware Products Co., Ltd. We are reliable exporter for Concrete Accessory and Garden Hardware. We founded in 2015. But our team has good and successful export experience more than 20 years. We have established good and long business relationships with many importers all over the world.
Our major product are focused on the Concrete Accessory and garden hardware products, including Anchor Bolt, Threaded Rods, Bar Support, Steel Nail Stakes, Flat Washers, Metal Lath, Double Loop Tie Wire, Snap Ties,X Flat Ties,Iron Nails and Concrete Nails, Iron Wire and Wire Products, Wire Mesh, Casting products,Earth Anchor and Pole Anchor, Farm and Fencing, HDG Corrugated Steel Sheets and making machine, Concrete Floor Making Machine, Wire Bending Machine and Other Related Hardware Products, etc...
Timely service, high quality products and competitive prices have given us a great reputation among clients worldwide. Looking forward to serving you!Thanks!
Q1: Can I have a sample for testing?
A: Yes, we can support sample. The sample will be charged reasonably according to the negotiation between us.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, OEM and ODM are available from us.
Q3: How can you control the quality of products?
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting or installation process, as well as aftermarket support.
Q4: Can we mix items in full container?
A: Yes. We ship our products in bulk, usually 40 feet high cube containers, but 20 feet containers are also acceptable.
Q5: Can I have a visit to your factory before the order?
A: Sure, welcome your visit to our factory.
){kind=link}